Select a technical image to view it in detail.
This time it is a rather hopeless case, involving an N43-series engine.
The problem
The engine had a vibration at idle, especially during a cold start. The injectors had been bench-tested and passed as good, then reinstalled and cleaned, with no improvement. They were tested again several times and passed every time, yet nothing changed. Once every other scenario had been tried and the owner had run out of ideas, he came to me.
What the data showed
The warm-engine data, including the injector adaptation values, was correct. Here is a screenshot from the cold-start video:

It clearly shows that the injectors of the 3rd and 4th cylinders (by position) are leaking. They are marked in red.
Confirming the diagnosis
To remove any doubt about the reliability of the diagnosis, I asked the owner to pull the spark plugs:

This confirms it: the mixture in cylinders 3 and 4 is very rich.
Conclusion
This is only one of many examples showing that bench “testing” of these injectors is completely useless. It can even permanently damage them. For the reason, read here.
The solution is simple: diagnostics. Live data will show where the problem is hiding.