Skip to content
Shop
Explore

INDEPENDENT BMW ENGINE EXPERTISE

From MSD80 to MSD81

N43 / N53 · NOXEM · DIAGNOSTICS

Select a technical image to view it in detail.

This entry covers the 160 kW to 200 kW upgrade option, which involves installing a brand-new DME (MSD81).

There is no information from the DME or car manufacturer on whether the MSD81 has fully solved the register overflow problem. This is a well-known issue, noticed at 320,000 km and 524,000 km. I therefore suggest:

  • Before installing the new DME, write a low mileage value into the CAS. This gives you at least 200,000 km without register overflow problems.
  • Use only the default memory field. Do not perform any “full reflash”, odometer modification or any other “solution” offered by chiptuners.

Ordering the MSD81

The new DME must be ordered by the vehicle owner. The dealer will ask for your personal ID and the vehicle registration documents. You also have to state the reason for the DME change and sign documents certifying that all information and data are true.

Only the owner can pick up the new DME, and only by presenting ID.

The price of the DME (2023/2024) is around EUR 1300.

This is what a new DME looks like:

Installation and first check in ISTA

Today’s task is installing the new DME:

After connecting the new DME, I opened ISTA to check whether it was recognized:

The DME communicates via CAN, but ISTA reports two errors:

  • No software data, or the data are incorrect or inappropriate.
  • No encoding data.

Here is the repair plan offered by the dealer tool:

The highest priority is to solve the DME programming and encoding problem, which is logical.

Which engine data will ISTA use?

This is where the most interesting part of the entry begins.

From the factory, this vehicle had the N53B30U0 engine with 160 kW. Later I bought an intake manifold with two DISA valves. In the CAS module I changed the Power_class from 00H to 02H and changed the FR to the appropriate one (E60; 530i) to raise engine power to 200 kW. The CAS accepted the Power_class change without problems, but changing the DME Power_class was harder and I had to work at it a bit. You can read more here.

The main question is what ISTA will do in this situation. There are two possibilities:

  • ISTA reads the engine type and Power_class from the VIN/VO databases.
  • ISTA reads the engine type from the CAS data.

The second option would of course be preferable. If it were the first, I would have to rely on the fact that the DME Power_class is locked only once the engine hours exceed 10. There would then be no problem changing the Power_class of a completely new DME with NCS.

This is the ISTA/P identification menu:

Pay attention to the fields marked in red:

  • OL = the most powerful, 200 kW version.
  • ND71 = E60; 530i (200 kW).

The data appear to come from the CAS, which is good news.

Programming and encoding

Here the replacement procedure is started, and the DME is programmed and encoded.

The initial report also shows the ND71 and OL entries.

The planned ZB release is 7649256. This is interesting because, for example, the last ZB batch for MSD80 was 86XXXXX.

ISTA also provides a screen for entering the injector coding:

Complete DME programming takes around 6 minutes:

Here are the initial and the programmed ZB of the DME:

DME programming was successful:

ISTA repeats the warning that the injector coding must be entered:

Entering the data this way is convenient and much faster than with ISTA/D:

The data are entered:

Verification and adaptations

I checked the DME Power_class with NCS:

NCS confirms that the engine has the OL (highest) power class:

The next steps of the service procedure are:

  • Warm the engine at idle to operating temperature.
  • Adapt the flywheel.
  • Create the initial fuel mixture (and injector) adaptations, in both homogeneous and stratified charge modes.

After creating the adaptations, I checked DISA operation with INPA: ../F6/F1/Shift+F4.

Everything is fine. Above 3500 RPM the small DISA 2 opens (right side of the menu) and its bar value changes to 67%. Above 5000 RPM the large DISA 1 bar also shows 67%. Excellent!

My first impressions of the MSD81 are here.

BEYOND THE FAULT CODE

A clearer picture.
A better next step.

Get in touch
Enlarged technical image
Open original image