Select a technical image to view it in detail.

It is no secret that piezo injectors (articles *049 and *079) have been in short supply since Q3 2020. Since then, the backorder for each article has been in the range of 15,000 to 25,000 units. Small quantities of injectors are supposedly delivered to dealers, but this is where things get strange. I believe the injectors supplied since the shortage began are not new. They are refurbished units from the earlier recall and warranty-replacement stock.
What is wrong with the injectors being supplied
The “new” injectors show the following problems:
- They are dirty, with clearly visible fingerprints, and they look deteriorated or rusty.
- The welding seams show every sign that the injectors have been disassembled and then welded repeatedly.
- Traces of sealing paste are very often visible on the thread of the injector filling element.
- Some injectors even have BLACK bodies. Black bodies were used on the early injectors that BMW recalled around 2008; remarks about this can be found in TIS.
- According to BMW users, and to information I have gathered myself, the performance of “new” injectors bought over the last two years is a lottery. Some injectors have incorrect coding data (at the edges of the allowed ranges) but good adaptation data. Others have seemingly correct coding data, but their adaptation data sit at the edges of the allowed fields. None of this was even imaginable with the old “new” injectors. To be fair, some injectors do perform excellently.
- Confidential information from BMW AG dealers says that in spring 2022 there was a recall of all injectors distributed during the shortage. Given the complicated situation and the lack of any alternative, only injectors still on dealership shelves were sent back. The injectors in customers’ cars were not removed, because there was nothing to replace them with.
Why I believe these injectors are not new
I claim that the injectors received since the start of the shortage are NOT new. They are restored parts from previous recall and warranty-replacement stock. Moreover, production of new injectors at the VDO factory ended around 7 to 8 years ago. After that, only assembly from warehouse stock (kept for future needs) took place. When the new billets ran out, about two years ago, the “acquisition” of used injectors and billets began.
What is this based on?
BMW produces more than 1.5 million cars a year. Around 65% of them, at least 800,000 to 900,000, are petrol vehicles. When the cars with piezo injectors (N43/N53 engines) were being built, with the biggest volume in 2008–2011, several hundred thousand of them were produced each year. The injector manufacturer therefore had a contract to supply at least 1 to 2 million injectors a year. That is a large number: today’s backorder is only 1 to 2% of the yearly volume of the active period.
The later injector bodies and other parts are fundamentally different from the initial versions, so the current production equipment is not suitable for making piezo injector spare parts. This is logical. Nobody keeps expensive high-performance equipment, stock supplies or trained personnel ready when the forecast load after the end of the active phase (production and sale of new vehicles with piezo-injector engines) is one or two days a year.
The logic is simple. Production of all new injectors for new cars under the BMW contract ended at the Siemens/VDO factory around 2012. Then, over one to three months (so impressive was the capacity of the equipment), around 200,000 to 400,000 injector billets were produced. They were to wait for assembly over the next 10 years and were intended for the warranty and post-warranty repair fund.
Why exactly 10 years? An EU regulation obliges the vehicle manufacturer to ensure the supply of all spare parts for a given car model for 10 years after the last car of that model leaves the assembly line. After those 10 years, alternative suppliers may become the only option.
After 2012, when production for the current vehicles ended, the Siemens/VDO factory dismantled its production equipment. It was replaced by equipment for next-generation injectors, leaving only one small-capacity assembly machine. Previously prepared billets were assembled as dealers ordered them. The piezo injectors turned out to be much more problematic than initially expected, so the billet stock ran out somewhat sooner than the 10-year period.
At the end of 2022, the 10-year maintenance period for injectors *048 ends. Over the last two years, the manufacturer has had to take emergency measures and repair old injectors.
Note that countless spare-parts sellers on the internet offer supposedly new VDO injectors with article number A2C9521220280, an apparent equivalent of the *048 injectors. There is one “slight” catch: the old injector, preferably the OEM one, has to be supplied in exchange. Why would the manufacturer want the old injector? Only to reuse it, because VDO repairs old injectors.
How to act in these circumstances
Unfortunately, the quality of the repaired injectors is not the best. With that in mind:
- Identify the defective injectors and replace only those. Be sure to fix any other engine problems, above all the NOx system. Only once the NOx system is repaired will the DME restore stratified charge injection mode and the measurement of injector performance.
- Buy injectors only from BMW AG dealers. That way you at least have a guarantee that the restoration was done by the proper cooperation partner, which should be one of the VDO branches.
- Keep the purchase documents (invoice, receipt, etc.).
- Install the injectors correctly: register them and perform the engine re-adaptation.
- Evaluate the injector adaptation data with INPA. If the adaptation data are incorrect, negotiate an injector exchange with the seller.
Bimmerprofs offers diagnostics to identify defective injectors, as well as evaluation of injector adaptations and live data. Use this service both before buying injectors and after installing newly purchased ones.